Affiliate disclosure: This post contains affiliate links. If you buy through them, House of Small Fixes may earn a small commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
If your garage bench still runs on a flimsy plastic strip and a tangle of orange cords, a heavy duty power strip is one of the cheapest upgrades you can make. The CCCEI 20-amp model is $31.19, and for that you get four switched outlets, a 6-foot 12-gauge cord, and a metal body with mounting tabs for the wall.
Think of it as a garage power strip first and a smart device never. There is no app, no schedule, and no energy graph. In the world of smart plugs, motion sensors, and energy monitors , this is the manual option: one sturdy spot for your heavy gear, with an individual outlet switch for every plug.
Quick verdict: Worth it for a workbench, shop, or utility area. It is $31.19, rated 4.8 stars across 487 ratings, and ranked #52 in Amazon's Power Strips category. Skip it if you want app control, energy tracking, or more than four outlets.
• Best for: tool benches and project spaces that need switched, wall-mounted power
• Price check: about $7.80 per switched outlet, and cheaper than the 8-port CCCEI strip shown beside it on Amazon
• Watch out for: the 1,875-watt limit, since most wall outlets sit on 15-amp circuits
Why a Workbench Needs More Than a Basic Power Strip
Walk into most garages and you will find the same setup: a flat white strip behind the bench, a saw plugged in next to a phone charger, and a cord everyone steps over. Nothing has gone wrong yet, which is exactly why nobody fixes it.
The usual problem is not the wiring. It is undersized hardware doing a workshop's job, plus the daily chore of pulling plugs to turn things off. If you are building your setup in order, a sturdy power point like this is a good first step before any gadgets. Our starter kit guide explains what comes next.
What $31.19 Gets You
The brief lists the price at $31.19. That is about $7.80 for each of the four switched outlets, and it includes the 12-gauge cord, the metal housing, and the wall-mount design. Here is how it sits next to the other items Amazon shows on the same page:
Product | Price shown | What it is | How it compares |
CCCEI 20-amp strip (this review) | $31.19 | 4 switched outlets, 6-ft 12-gauge cord, wall mount | The baseline |
CCCEI 12-gauge 8-port strip, grey, 6 ft | $35.99 (shown as 10% off, typical $39.99) | 8 ports | $4.80 more; worth it only if you really need eight |
CCCEI heavy-duty strip with USB, yellow, 6 ft | $24.99 | Metal housing, multiple outlets, USB | $6.20 less; check its amp rating and switches first |
Deeklify 25-ft 12-gauge cord, 3 outlets | $35.99 | Extension cord, not a wall-mount strip | $4.80 more, about $12 per outlet |
HUANCHAIN 25-ft 12-gauge outdoor cord | $26.99 | Outdoor extension cord | Different job: reach, not a bench hub |
POWGRN 50-ft 12/3 outdoor cord | $44.99 | Long outdoor cord | Different job: distance |
These are the items Amazon lists as also bought by customers, so they are not all like-for-like. The takeaway is simple: for a four-outlet, switched, wall-mount strip with a thick cord, about $31 is a fair place to land, not a stretch.
Shoppers seem to agree. The brief estimates roughly 1,000 sales a month for this 6-ft yellow variant, and shows 77 new ratings in the last month. The listing has been up since July 2025. Prices change, so confirm today's number on the product page. If you also want to know what your equipment costs to run, our weekend energy-efficiency plan is a good next read.
The Features That Earn the Price
Individual Switches
Each of the four outlets has its own switch, so the saw can stay off while the work light and a charger stay on. At the end of the day you flip things off in one pass instead of crawling behind the bench. Two reviewers also mention a master switch. The listing facts I have do not, so check the product page for details.
The 12-Gauge Cord
A lower gauge number means thicker wire, which is a better match for tools than the thin cords on many office strips. The listed 1,875-watt limit works out to 15 amps at 125 volts, the same as the standard 15-amp plug on the cord. The thick cord is a real strength, but your wall circuit still sets the ceiling.
Spacing, Wall Mounting, and Metal Body
Four widely spaced outlets leave room for bulky plugs and charger bricks. Screwing the strip to the wall or the front of a bench keeps the cord off the floor and the switches in reach. The listing describes a thickened metal housing, and the seller cites ETL listing number 5019543. Treat both as seller claims and check the labels when it arrives.
Protection
The listing also describes 4,800 joules of surge protection, overload protection, grounding protection, and a surge-protection indicator light. These are useful layers, but they are not a guarantee for your devices.
What Real Buyers Say
I went through the verified-purchase reviews pulled from the listing page. This is a sample of recent ones, not all 487 ratings, but the themes are consistent.
The garage and shop crowd likes the build. Clay Pigeon (October 2026) calls it sturdy enough for shop or jobsite use, with an all-metal housing and mounting tabs, and uses a switched outlet for a dust-collection vac. Baruch (August 2026) points to the heavier-gauge wire and the individual switches, and says he would buy again.
One reviewer put it to a real test. Gta04 (June 2026) bought two strips for two garage workbenches and mounted them to the front of the benches. A table saw and a compressor, each rated at 15 amps, were run separately, and the strip and cord never got warm. That reviewer still gave it a strong recommendation.
The kitchen crowd likes the switches. S R (September 2026) keeps a counter oven, air fryer, kettle, and microwave plugged in and switches each on only when needed, and says it ended the breaker trips. That works because only one runs at a time. Those appliances together would pass 1,875 watts. Buyers in Mexico describe similar kitchen use with a microwave and an oven.
The complaints are small and practical. Gta04 found the included mounting screws too light for repeated plugging and used larger ones. Craig R (July 2026) suggests different anchors for drywall, notes that the plug sits proud and could fall out of a loose wall outlet, and points out there are no USB ports. Brady A Jones (September 2026) measured the strip a little over 12.5 inches against 12.09 listed, so leave a bit of extra room when you mark your screw holes.
Theme | What buyers said |
Build quality | Heavy duty, all-metal housing, far sturdier than plastic strips |
Switches | Handy for turning off a single outlet; one reviewer also notes a master switch |
Workshop use | Table saw and compressor run one at a time without the strip or cord warming up |
Kitchen counter | Several appliances plugged in and switched on as needed |
Mounting screws | Stock screws felt light; larger screws or drywall anchors suggested |
Plug fit and size | Plug can fall out of a loose outlet; length measured over 12.5 in |
The pattern is clear: praise for build and switches, and minor gripes about hardware and fit. For about $31, that is a trade most workshop owners will take.
Who Should Buy It (and Who Shouldn't)
• Garage bench or small shop with several corded tools and chargers? This is the sweet spot.
• Tired of crawling behind the bench to unplug things? Switches and wall mounting solve that.
• Need a sturdier kitchen-counter or utility-room power point? Fine, as long as appliances run one at a time and total wattage stays within the limit.
• Want app control, schedules, or voice commands? Skip it and see which smart plug fits.
• Want to see what a device costs to run? An energy monitor is the right tool.
• Need more than four outlets, or equipment above 1,875 watts? Skip it and talk to an electrician about a dedicated circuit.
Heavy-Duty Strip vs. Other Options
Option | Control | Best for | Trade-off |
Manual switch per outlet | Garage, shop, utility area | Four outlets, no automation | |
Ordinary household strip | Often one master switch or none | TVs, desks, bedrooms | Not built for heavy tools |
Smart plug | App, schedule, voice | Lamps and fans you want automated | One device per plug |
Energy monitor plug | Shows usage | Finding what costs money | Measures, does not organize |
Before You Plug In
A few quick rules keep this simple:
• Your wall circuit sets the ceiling, not the 20-amp label. The cord has a standard 15-amp plug.
• Stay under 1,875 watts and run heavy loads one at a time. Motors can draw more when they start.
• No daisy chains, forced adapters, or damaged cords. Surge protection is one layer, not a guarantee.
• Outdoors is not a given. The listing says to protect it. Follow the manufacturer's instructions and local electrical requirements.
• Ask a qualified electrician about high-power equipment, unusual outlets, workshop wiring, permanent installs, or any 20-amp question.
Quick FAQ
Is this a smart power strip? No. Control is manual, through the individual switches.
Does a 20-amp rating mean I can draw 20 amps? No. Your circuit, wiring, plug, and the manufacturer's limit all apply. The listing says not to exceed 1,875 watts.
Which size and color should I get? Reviewers mention 4-, 6-, and 10-foot versions in yellow and black, and the brief lists 25 variants. Check the product page for what is in stock and at what price.
Bottom line: at $31.19, with 4.8 stars, a metal body, and a switch for every outlet, this is an easy upgrade for a garage bench or project space. If you want automation, energy tracking, or lots of outlets, choose a different tool. Let's make your home work for you, not the other way around.
